-2-
WARNING:
-
High pressure hoses, fittings and couplings are important for safety of the appliance. Use
only hoses, fittings and couplings recommended by the manufacturer.
Do not use the appliance if a supply cord or important parts of the appliance are damaged, e.g. safety
-
devices, high pressure hoses, trigger gun.
If an extension cord is used, the plug and socket must be of watertight construction.
-
WARNING:
-
Inadequate extension cords can be dangerous.
This high pressure washer must not be used at temperatures below 0°C.
-
WARNING:
-
Appropriate ear protection is suggested to be used during operation.
WARNING!
Extension cables should always be completely unwound to prevent the cord from overheating. If
an extension cord is used, the plug and the socket must be waterproof and comply with the below-
mentioned requirements for length and cord dimensions.
1.0 mm²
max. 12.5 m
1.5 mm²
max. 20 m
2.5 mm²
max. 30 m
Power cord connections should be kept dry and off the ground.
If the power cord is damaged, it must be replaced by qualified person in order to avoid a hazard.
-
Mains power connection
It is recommended that the electric supply to this appliance should include either a residual current
-
device that will interrupt the supply if the leakage current to earth exceeds 30 mA for 30 ms.
Water connection
Connection to the public mains according to regulations.
-
Inlet hose can be connected to the water mains with a max. inlet pressure of 0.7MPa.
-
Safety devices
The unloader valve can reduce pressure if it exceeds pre-set values. The spray gun features a locking
-
device. When the pawl is activated, the spray gun cannot be operated.
Thermal sensor:
A thermal sensor protects the motor against overloading. The machine will restart after a few
minutes when the thermal sensor has cooled.
