background image

-7- 

-8- 

Release 
button

Fig 13

WATER INLET FILTER

The water inlet filter must be inspected 

regularly, so as to avoid blockage and 

restriction in the water supply to the pump 

(Fig 12). The inlet filter is located in the 

quick fit connector (14).

Fig 12

TURBO NOZZLE 

A turbo nozzle, sometimes referred to 

as a rotary nozzle, is a very effective 

tool that can significantly reduce 

cleaning time.  The turbo nozzle 

combines the power of a narrow high 

impact stream and the efficiency of a 25 

degree fan pattern.  This swirls the 

narrow high impact stream into a cone 

shape that cleans a larger area.

CAUTION: 

Since a turbo nozzle uses a 

narrow high impact stream, only use it 

in applications where the cleaning 

surface cannot be damaged by a 

narrow high impact spray. Note: The 

turbo nozzle is NOT adjustable and 

cannot be used to apply detergent.

 

WARNING

When cleaning painted surfaces, ensure 

that the paint is sound and there are no 

signs of rusting or blistering.

It is your responsibility to check the 

suitability of the surface to be cleaned. 

Hilka Pro Imports cannot be held 

responsible for any damage caused.

USING DETERGENT

The detergent containers can be removed for filling/cleaning by pressing the release

button (Fig 13). Add detergent to each container and replace cap. Select detergent

tank using the detergent supply switch (4). Press the trigger to start spraying.

NOTE: Detergents can only be used in low pressure settings:

 

-with adjustable lance in low pressure setting (Fig 11)

 

-with fixed brush

 

-with rotary brush

The detergent will not flow in high pressure settings:

 

-with adjustable lance in high pressure setting (Fig 11)

 

-with turbo lance

Detergent Tank Selection 

Position 2

Position 1

Содержание RAC-HP101










Отзывы: