RabbitCore RCM2000 Series, Руководство по началу работы

Страница: 9 / 46

Getting Started 5
2. H
ARDWARE
S
ETUP
This chapter describes the RCM2200 hardware in more detail, and
explains how to set up and use the accompanying Prototyping Board.
NOTE: This chapter (and this manual) assume that you have the RCM2200 Development
Kit. If you purchased an RCM2200 module by itself, you will have to adapt the infor-
mation in this chapter and elsewhere to your test and development setup.
2.1 Development Kit Contents
The RCM2200 Development Kit contains the following items:
•
RCM2200 module with Ethernet port, 256K flash memory, and 128K SRAM.
•
RCM2200 Prototyping Board.
•
Wall transformer power supply, 12 V DC, 500 mA. (Included only with Development
Kits sold for the North American market. Overseas users will have to substitute a
power supply compatible with local mains power.)
•
10-pin header to DE9 programming cable with integrated level-matching circuitry.
•
Dynamic C SE CD-ROM, with complete product documentation on disk.
•
This Getting Started manual.
•
Rabbit 2000 Processor Easy Reference poster.
•
Registration card.