Rabbit RCM2000, Руководство по началу работы

Страница: 18 / 38

14 RabbitCore RCM2000
•
Dynamic C provides extensions to the C language (such as shared and protected vari-
ables, costatements and cofunctions) that support real-world embedded system devel-
opment. Interrupt service routines may be written in C. Dynamic C supports
cooperative and preemptive multi-tasking.
•
Dynamic C comes with many function libraries, all in source code. These libraries sup-
port real-time programming, machine level I/O, and provide standard string and math
functions.
•
Dynamic C compiles directly to memory. Functions and libraries are compiled and
linked and downloaded on-the-fly. On a fast PC, Dynamic C can load 30,000 bytes of
code in 5 seconds at a baud rate of 115,200 bps.
3.2 System Requirements
To install and run Dynamic C, your system must be running one of the following operating
systems:
•
Windows 95
•
Windows 98
•
Windows NT
•
Windows Me
•
Windows 2000
3.2.1 Hardware Requirements
The PC on which you install Dynamic C for development of RCM2000-based systems
should have the following hardware:
•
A Pentium or later microprocessor
•
32 MB of RAM
•
At least 40 MB of free hard drive space
•
At least one free COM (serial) port for communication with the target systems
•
A CD-ROM drive (for software installation)