Rabbit RabbitCore RCM5400W Скачать руководство пользователя страница 77 | Manualshive

Страница: 77 / 120

Rabbit RabbitCore RCM5400W Скачать руководство пользователя страница 77

User’s Manual

71

6.3 Dynamic C Wi-Fi Configurations

Rabbit has implemented a packet driver for the RCM5400W that functions much like an
Ethernet driver for the Dynamic C implementation of the TCP/IP protocol stack. In addi-
tion to functioning like an Ethernet packet driver, this driver implements a function call to
access the functions implemented on the 802.11b/g interface, and to mask channels that
are not available in the region where the RCM5400W will be used.

The Wi-Fi interface may be used either at compile time using macro statements or at run
time with the

ifconfig()

function call from the Dynamic C

LIB\Rabbit4000\TCPIP\

NET.LIB

library.

6.3.1 Configuring TCP/IP at Compile Time

Digi International has made it easy for you to set up the parameter configuration using
already-defined

TCPCONFIG

macros from the Dynamic C

LIB\Rabbit4000\TCPIP\

TCP_CONFIG.LIB

library at the beginning of your program as in the example below.

#define TCPCONFIG 1

There are two

TCPCONFIG

macros specifically set up for Wi-Fi applications with the

RCM5400W module. (

TCPCONFIG 0

is not supported for Wi-Fi applications.)

These default IP address, netmask, nameserver, and gateway network parameters are set
up for the

TCPCONFIG

macros.

#define _PRIMARY_STATIC_IP "10.10.6.100"

#define _PRIMARY_NETMASK "255.255.255.0"

#define MY_NAMESERVER "10.10.6.1"

#define MY_GATEWAY "10.10.6.1"

The use of quotation marks in the examples described in this chapter is important since the
absence of quotation marks will be flagged with warning messages when encrypted librar-
ies are used.

Wi-Fi Parameters

•

Access Point SSID—

IFC_WIFI_SSID

. This is the only mandatory parameter. Define

the

IFC_WIFI_SSID

macro to a string for the SSID of the access point in the infra-

structure (BSS) mode, or the SSID of the ad-hoc network in the ad-hoc (IBSS) mode.

The default is shown below.

#define IFC_WIFI_SSID "rabbitTest"

•

Mode—

IFC_WIFI_MODE

determines the mode:

IFPARAM_WIFI_INFRASTRUCT

for the infrastructure mode, or

IFPARAM_WIFI_ADHOC

for the ad-hoc mode.

The default is shown below.

#define IFC_WIFI_MODE IFPARAM_WIFI_INFRASTRUCT

TCPCONFIG 1

No DHCP

TCPCONFIG 5

DHCP enabled

«
...
75
76
77
78
79
...
»

Содержание RabbitCore RCM5400W

























































































































Отзывы:

Нет отзывов