Complete these steps first before operating the unit.
Let’s Begin!
Quick Start Guide
Start Here
Next Page
Visit us at www.rabbitair.com
For questions, call 888.866.8862
24/7 customer care
BioGS 2.0 initial filter installation
Pre-Filter
BioGS HEPA
Filter
Charcoal-Based
Activated Carbon
Filter
Front panel
1. Remove the front
panel by lifting from the
bottom and pulling up.
2. Pinch the two tabs on
top of the Pre-Filter to
remove it.
4. Remove the HEPA Filter and
discard its plastic wrapping.
3. Pull out the Activated Carbon Filter
and discard its plastic wrapping.
