INSTRUCTIONS
FIELD-ADJUSTABLE TOMO™ INSTALLATION
RAB Lighting is committed to creating high-quality, affordable, well-designed and energy-efficient LED lighting and controls that make it easy for electricians to install
and end users to save energy. We’d love to hear your comments. Please call the Marketing Department at 888-RAB-1000 or email: [email protected]
FIELD ADJUSTMENT
Color
(CCT)
Selection Switch
Power
(W)
Selection Switch
TOMO-2
TOMO-4
TOMO-8
Fig: 9
Fig: 10
Fig: 11
Power
(W)
Selection Switch
Color
(CCT)
Selection Switch
Color
(CCT)
Selection Switch
Power
(W)
Selection Switch
CONTINUOUS RUN MOUNTING
Multiple fixtures can be mounted together using
TOMO CONNECT
TOMO CONNECT
(sold separately).
Note: Continuous Run Mounting is not
a
vailable with
LIGHTCLOUD® /LC, /LC/E, /LCB suffix.
1.
For continuous run, remove fixture
End Caps
(Fig. 6)
. Pop out
Silicone Plugs
, push Fixtures together using
TOMO CONNECT
(ordered separately)
between fixtures for quick connect
installation
(Fig. 7)
.
TOMO CONNECT
is provided with
(2)
Fixing
Screws
. Install
Fixing Screws
in
Silicone Plug
points. Only
(1)
one
Fixture
needs to be electrically hard wired from above
(Fig.
8)
.
2.
CAUTION:
The maximum number of fixtures allowed to be
linked together is indicated in table below
(120V through 277V
only)
.
WARNING: To prevent wiring damage or abrasion, do not expose
wiring to sharp objects.
Catalog #
TOMO-2
TOMO-4
TOMO-8
Maximum Number of Linked Fixtures
Up to
28
fixtures
Up to
14
fixtures
Up to
7
fixtures
TOMO CONNECT
Fig: 6
Fig: 7
Fig: 8
Fixing Screws
Silicone Plug
TOMO
CONNECT
Follow inst
ructions below to change the fixture
Color
Temperature
(CCT)
and
Power
(W)
from the factory settings.
Factory Settings: TOMO-2 18W / 4000K
TOMO-4 36W / 4000K
TOMO-8 72W / 4000K
1. Remove
End Caps
. Slide
Lens Tray Assembly
from
Housing
Cover
to release
Tray Assembly
from
Housing Cover
by
sliding the fixture to the right to unlock from
Key Slots
as
shown in Fig. 3
.
Pre-installed
Tether Cables
(2)
will prevent
Lens and Tray Assembly
from separating from
Housing Cover
as shown in Fig. 1
.
2.
Locate the selector switches inside the
Lens & Tray Assembly
as shown below for TOMO-2, TOMO-4 TOMO-8
(Fig. 9, 10, 11).
Note: TOMO-8 is equipped with two
(2)
Color Temperature
(CCT)
switches
and
(2)
two Power
(W)
switches.
3. Select a
Color Temperature
(CCT)
and
Power
(W)
by sliding
the respective switch to the desired value.
4. After the switch is positioned to the desired setting, push
Lens
and Tray Assembly
into the
Housing Cover
. Align
Keys
into
Key Slots
and slide to the left to lock the
Housing Cover
into
the
Lens and Tray Assembly
. Snap on
End Caps
.
WARNING: To prevent wiring damage or abrasion, do
not expose wiring to edges of sharp objects.