R.V.R. Elettronica VJ8000-TR, Техническое руководство

Страница: 8 / 81

Date: 25/07/03 R.V.R. Elettronica S.r.l. (BO) VJ8000-TR - R.F. Tube Amplifier
8
Thus for failure Code N (3000 hours) if failure occurred after 600 hours and was found to be
workmanship or materials related:
3000 - 600
= 80%
3000
Tubes being returned on a warranty claim are normally sent to authorized Varian distributor or
OEM from whom originally purchased. If returned directly to the Varian plant of manufacture, the
authorized Varian Distributor or OEM from whom purchased should be notified in case there are
some special instructions. All products returned on a warranty claim must be shipped via prepaid
freight and include a completed copy of a service report form, a copy of which is included with
every shipped product. A warranty claim cannot be processed without this form. A copy of the
original invoice, bill of sale, or other purchase document should be included with the executed
service report form to establish purchase date and price. The original Varian shipping carton and
packing material should always be used for any warranty claim return. Shipping damage because of
poor packing will normally preclude any warranty adjustment since the damage will usually make
any testing or measuraments impossible.
PARCEL POST SHOULD NEVER BE USED FOR SHIPMENT OF TUBES.
III – SAFETY REGULAMENT!
WARNING!
The currents and voltages in this equipment are dangerous! Personnel must at all times observe
safety regulation. This manual is intended as a general guide for trained and qualified personnel
who are aware of the dangers inherent in handling potentially hazardous electrical and electronic
circuits.
It is not intended to contain a complete statement of all safety precautions which should be
observed by personnel in using this or other electronic equipment.
The installation, operation, maintenance and service of this equipment involves risks both to
personnel and equipment, and must be performed only by qualified personnel exercising due care.
R.V.R. ELETTRONICA S.p.a. shall not be responsible for injury or damage resulting from
improper procedures or from the use of improperly trained or inexperienced personnel performing
such tasks. During installation and operation of this equipment, local building codes and fire
protection standards must be observed.
WARNING!
Always disconnect power before opening covers, doors, enclosures, gates, panels or shields.
Always use grounding sticks and short out high voltage points before servicing. never make
internal adjustments, perform maintenance or service when alone or when fatigued.
Do not remove, short-circuit or tamper with interlock switches on access covers, doors, enclosures,
gates, panels or shields. Keep away from live circuits, know your equipment and don't take chances.
WARNING!