47
The scanned QC strips will be displayed for you.
Next, open RIDA qLine® Soft and start the QC measurement.
10 Instrument Shutdown
This section describes the procedure that must be followed when the user wishes to shut
down the instrument. The user is strongly advised to follow this routine during every
shutdown.
If the user is ready to shut down the instrument, the first step to take should be to power
down the instrument. By navigating to the
main men
u, the
system menu
button will
become available; the user should navigate to the system menu and access the ‘Infor-
mation’ tab. At the bottom of this screen, the power options for the instrument can be
