2014-09-30
Page 18 of 34
R-Biopharm AG
Optional Equipment
Barcode scanner or PC
The following optional devices (not included in the standard delivery package) can be connected to the
Instrument:
•
An external barcode scanner
•
A PC – for the transfer of test data into a HIS or laboratory software
Connect optional equipment only when the Instrument is switched off. Please note
that attaching optional equipment (e.g. a printer) can increase the amount of
leakage current. All optional equipment must be connected before such leakage
current can be measured.
If the Instrument is not used according to the instruction manual, then the provided
levels of safety will be lowered.
Connecting a barcode scanner
To install the Datalogic Touch 65 barcode reader (Order number: SZ0400) please connect the RS232
cable to the RS232 socket at the Instrument (see illustration below). Always connect the power supply to
the barcode scanner correctly before using it.
The barcode reader can handle barcodes up to 16 digits.
.
RIDA
®
CUBE SCAN Instrument Interfaces
Power supply
USB Socket
for connecting a
PC (for data transfer)
Tablet PC-Lock eyelet
Bluetooth on/off
switch
(left: Bluetooth OFF)
USB Port
for connecting a
Tablet PC
RS 232
socket for connecting a
printer, a barcode reader or a
PC (for data transfer)
Содержание RIDA CUBE SCAN
Страница 1: ...2014 09 30 Page 1 of 34 R Biopharm AG...