© Copyright Qvis® All documentation rights reserved.
14
4
WALL MOUNT BRACKET INSTALLATION
4.1
Component Installation
Wall mount bracket is shown as below. See Figure 4-1.
Figure 4-1
4.2
Installation
4.2.1 Installation Requirements
The wall mount speed dome can be installed onto a hard construction wall in either indoor or outdoor
environments. Before the installation, please make sure:
The wall is thick enough to install the expansion bolt.
The wall can at least sustain the 4x weight of the speed dome.
4.2.2 Installation Steps
Draw 4 points, on to the installation wall, which line up with the screw holes wall mount bracket. Then you can
drill four holes and insert the expansion bolts (not provided). Use four hex bolts and flat washers to fix the
bracket in to the expansion bolts. It should now be fixed into position securely (see Figure 4-2).
Figure 4-2
