LED14
BATTERY INSTALLATION:
1. Carefully remove the product from the packaging.
2. Open the battery box by releasing the two clips on the side of the box (Fig. 1).
3. Insert three D batteries (not included) into the battery compartment. Ensure that the batteries are
inserted with the correct polarity as marked on the battery compartment (Fig. 2).
4. Close the box and secure the two clips.
HOW TO USE:
Turn the knob on the upper left corner to the Battery Box to change from 1 - Warm White, 2 - Warm White
Timer, 3 - Multi, 4 - Multi Timer, 5 - Color Change, 6 - Color Change Timer, and 7 - Off.
NOTE: Timer limits are 6 hours on/18 hours off.
IMPORTANT SAFETY INSTRUCTIONS
a)
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
b) This seasonal product is for INDOOR and OUTDOOR use.
c) This seasonal use product is not intended for permanent installation or use.
d) Do not use this product for anything other than its intended use.
e) Do not hang ornaments or other objects from the wire or light string.
f) Do not cover the product with any material when in use.
g) This product is equipped with push-in type LED’s. Do not twist LED’s to remove.
h) Read and follow all instructions that are on the product or provided with the product.
i)
SAVE THESE INSTRUCTIONS.
CAUTION:
1. Do not operate this product while it is still in the packaging.
2. Never mix old and new batteries (OR different types of batteries).
3. Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-MH, Ni-CD, etc.) batteries.
4. Batteries are to be inserted with the correct polarity.
5. Exhausted batteries are to be removed from the battery holder.
6. The supply terminals are not to be short circuited.
7. Do not throw batteries into fire.
8. Batteries should never be left in the product when not in use for long periods of time.
9. Never allow any plastic part to come in contact with a source of heat or flame.
10. Batteries are not included.
11. This is a Christmas decoration.This is not a toy. Keep out of the hands of small children.
DISPOSAL AND RECYCLING:
Waste electrical products should not be disposed of with household waste. Please recycle where facilities
exist. Check with your local authority or retailer for recycling advice. This applies to the battery also.
TROUBLESHOOTING:
If lighting is out of sequence after replacing an LED, remove and re-insert the LED making sure to align
the husk tabs as illustrated above. This is a specialty bulb. Do not replace with a standard LED or
Incandescent bulb. Should you need additional bulbs please call our customer service department at
1-888-831-6656.
USE AND CARE INSTRUCTIONS
a) Before using, inspect product carefully. Discard any products that have cut, damaged, or frayed wire
insulation or cords, cracks in the LED holders or enclosures, loose connections or exposed copper wire.
b) LEDs that become loose or that burn out must be replaced promptly in order to maintain the
performance and life expectancy of this set.
c) When not in use, store neatly in a cool, dry location protected from sunlight.
LED replacement:
Before changing LEDs, make sure the item is “OFF” and batteries are removed .
©2014 Santa's Best LTD, Suite 3902-08 Skyline Tower, 39 Wang Kwong Rd, Kowloon Bay, Kowloon, HK. All rights reserved. MADE IN CHINA PRINTED IN CHINA
Actual LED cover may vary according to product purchased.
Thank you for purchasing this battery-operated product. Please read the instructions below.
Step 3: Replace LED with only 3 volt, 20 mA
LED type LED (provided with product).
Step 1: Grasp plug and remove from the receptacle
or other outlet device. Do not unplug by
pulling cord.
Step 2: Hold LED by the plastic base and pull
LED/base straight out of socket.
LED
BASE
SOCKET
LED
BASE
LED
WIRES
Fig. 2
D Battery
D Battery
D Battery
1
1. Warm White
2. Warm White Timer
3. Multi
4. Multi Timer
5. Color Change
6. Color Change Timer
7. OFF
2
6
4
3
5
7
MODEL NO. 7102081-62QV
Fig. 1
2014 QVC
BO - Safety Instruction - English
Size: 10” x 6”
Date: 5/7/14
Item # 7102081-62QV
