2.
Press the
SELECT
button to activate the file selection window. The file browser path will
automatically set to the appropriate directory where all
config
files are stored.
3.
Press the
SELECT
button to highlight the config file to be loaded. If you make a mistake, simply
navigate to another file and press the
SELECT
button.
4.
Press the
soft
button labeled
Okay
to load the settings from the selected config file.
Restore Factory Settings
To restore the factory settings, perform the
Load Custom Settings from a Config File
procedure
selecting the
factory.cfg
file as the file to be loaded in step 3. Alternately, you may also set the
factory.cfg
Set the Default Startup Config File
using the procedure outlined in that
section as well.
QuVIS Encore
Page 123
QSR Version 3.1
