3
STEP 1:
a. Remove the finial, fixture hood, flat washer from the
stem assembly.
: Place a cloth or towel on the ground under the
work area to prevent loss of mounting hardware if
dropped.
Note
STEP 5:
a. Install correct bulbs referring to fixture markings and/or labels for maximum wattage.
Fixture hood
Fixture body
Fixture body
Post
Post Fitter
STEP 4:
a. Coat the top 1 in. of the post with clear silicone caulk
(not supplied) and position the post fitter of the fixture
body onto the post.
b. Be sure to seat it completely, aligning the holes in the
fitter with the 1/16 in. pilot holes drilled into the post.
c. Secure using the mounting screws.
Fixture body
Post
Post Fitter
Mounting
Hole
Mounting Screw
Stem
Finial
Flat Washer
STEP 2:
a. Carefully fit the post fitter of the fixture body over the
end of the post (not supplied), making sure the post
fitter is fully seated.
b. Mark the drill point for the 3 mounting screws using 3
mounting holes as reference.
c. After marking hole locations, remove fixture from post
and drill 1/16 in. pilot holes for screws.
WHITE
BLACK (OR RED) WIRE
WHITE
BLACK
FROM SUPPLY
FROM SUPPLY
FROM FIXTURE
FROM FIXTURE
STEP 3:
* Use Wire Connectors (supplied) to connect the wires.
ground wire
supply ground
supply white wire
white fixture
supply wire
e supply black (or red)
black
fixture supply wire
a. Connect fixture
to
wire with
wire connector.
b. Connect the
to the
with wire connector.
c. Connect th
wire to the
with wire connector.
d. Wrap each connection with approved electrical tape and
carefully stuff all of the connected wires into the post.
GROUND WIRE
GROUND WIRE
FROM SUPPLY
FROM FIXTURE
2018 QuoizelInc.
