2-4 Operating the Treadmill
MedTrack Rehabilitation Treadmills User Guide
To restart the treadmill, replace the magnetic key, then, if the
power key on the controller is on, press
Start Belt
; if the power
key is off, press
Power
.
Deactivation
To deactivate the control:
1. Remove the magnetic key and press the
Power
key off.
2. Press and hold the
+
,
-
, and
Power
keys until the 8s on the
display go off, then release the keys. The control remains
inactive, granting unrestricted access, until you place the
magnetic key over the logo again.
Magnetic Key as Emergency Stop
The magnetic key has a cord that you can attach to the
patient's wrist or belt during exercise. If the patient moves too
far from the controller, the cord will pull the key off the
controller and stop the walking belt.
Time Limit Control
The time limit control lets you set a maximum time for
treadmill use, ranging from 7 to 96 minutes. When the time
limit is activated, the treadmill runs for the time entered by
the clinician, then automatically changes to minimum speed
and grade. The speed and grade controls remain inoperative
until you press the
Stop Belt
key.
Activation
To limit the exercise time, use the following procedure:
1. Simultaneously press
Stop Belt
,
Cool Down
, and
Select
.
2. Press the
+
or
-
keys to increase or decrease the time to the
desired limit. Press
Clear
to set the limit automatically to
30 minutes.
3. Press
Select
.
