manualshive.com logo in svg

Quincy Compressor QED-1250, Инструкция, Страница: 84 / 116

Поделиться
Скачать
Quincy Compressor QED-1250 Скачать руководство пользователя страница 84

• On the left side of the interface the navigation menu can be found.

If a license for ESi is foreseen, the menu contains 3 buttons.

• Machine: shows all machine settings.
• ES: shows the ESi status (if a license is provided).
• Preferences: allows to change temperature and pressure unit.

Machine settings

All settings can be hidden or shown. Put a mark for each setting. Only the machine status is fixed
and can not be removed from the main screen.

• Analog inputs (the units of measure can be changed in the preference button from the

navigation menu).

• Counters: give an overview of all actual counters from controller and machine.
• Info status: the machine status is always shown on the web interface.
• Digital inputs: gives an overview of all digital inputs and their status.
• Digital outputs: shows a list of all digital outputs and their status.
• Special protections: give an overview of all special protections of the machine.
• Service plan: shows all levels of the service plan and status. This screen only shows the

running hours. It is also possible to show the actual status of the service interval.

• ES screen controller: if an ESi license is provided, the button ES is shown in the navigation

menu. At the left all machines in the ES and at the right the ES status is shown.

3.18 Programmable settings

Settings

The regulating and safety devices are factory-adjusted to obtain optimum performance of the
dryer. No adjustments are required.

Instruction book

82

2920 1992 00

Содержание QED-1250





















































































































Отзывы:

Нет отзывов