6
INSTALLING THE TELESCOPIC ARMS
CENTRAL SINGLE MOTOR LATERAL
DOUBLE
MOTOR
1. Cut the components of the telescopic arms
and anchor them to the transmission axis.
1. Cut the components of the telescopic arms
and anchor them.
ADJUSTING THE END-LIMIT SWITCHES
In case the installed automation is made up by a central-
motor, the stroke of the tilting gate is adjusted by acting on
the stops (1), and by rotating them in the ring that seats
them (2).
In case the installed automation is made up of 2 lateral
motors, the procedure is the same, but the adjustment will
only be performed in the gear motor with the unit.
E
N
G
L
I
S
H
