QuickLabel Kiaro! 50, Руководство пользователя

Страница: 109 / 136

Troubleshooting
Kiaro! 50 User Guide 93
Printer Pauses and Retracts Media Periodically During
Print Jobs
Color deviation appears in the print
result. Confirm that the label set (size, shape,
and type) that displays color deviation
matches the label (size, shape, and
type) configured by the application soft-
ware or printer driver.
The area around characters or the layer
areas appear uneven. Confirm that the label set (size, shape,
and type) matches the label (size,
shape, and type) configured by the
application software or printer driver.
Overall appearance of the printed out-
put is not satisfactory. Ensure the correct media is being used.
Confirm that the label set (size, shape,
and type) matches the label (size,
shape, and type) configured by the
application software or printer driver.
Printed media is wavy and rubbing
marks are left on the media. Confirm that the label set (size, shape,
and type) matches the label (size,
shape, and type) configured by the
application software or printer driver.
The back side of the media gets dirty. When printing with the wrong media
size, the media guide or transport area
may become dirty. Confirm that the size
of the media set and the media config-
ured by the application software or
printer driver are the same.
If the media guide or transport area is
dirty, Clean the transport unit.
Check Point Solution
Are any ink tanks nearly empty? Printer is operating normally. See “Ink
Tank End-of-Life Sequence” on page
73.
Check Point Solution