QuickLabel Systems QLS-4100 Скачать руководство пользователя страница 76

Страница: 76 / 215

4-32

Keypad controls and menus

To activate manual media pull back with the Operation menu:

If the printer is in a Ready state, press the PRINT/PAUSE key to pause
the printer.

Press the NEXT or PREVIOUS key until the Operation menu is
displayed. Then press the SELECT key.

Press the NEXT or PREVIOUS key until the Pull Back menu is displayed.

Press the SELECT key. A message will be displayed to confirm Pull Back
operation.

Press the SELECT key.

The printer will begin rewinding media until the last unprinted label is
positioned just behind the media sensor.

If a Pull Back operation has been requested and a print batch has not
been sent to the printer or the media has been moved in any way (i.e.
Form Feed, Calibrate, Test Print, etc.) the following error message will be
displayed.

Pull Back Off

Media Moved / No Batch

Pull Back

SELECT to confirm

Pull Back

Press SELECT

Pause: Operation

Press SELECT

Содержание QLS-4100
























































































































































































































Результаты поиска

Содержание QLS-4100

Отзывы:

QuickLabel Systems QLS-4100, Инструкция по эксплуатации и установке, Страница: 76 / 215

Результаты поиска

Содержание QLS-4100

Отзывы: