QuickLabel Systems pronto! 482, Руководство пользователя

Страница: 205 / 256

Pronto! 482/486/682/863 12-9
Device list
1 Insert printable medium (labels, endless paper) which extends across the
entire printing width.
2 If the printout is to occur using thermal transfer printing, insert transfer
ribbon with the maximum width.
3 Press the menu button.
4 Select Test > Device list menu.
5 Start printout with the
↵
button.
You can cancel the printout with the cancel button.
The Device list function prints out the most important
information on hardware components of the printer and
connected devices. The printout occurs using the heat level and
print speed specified in the Setup > Print param. menu.
Note: The printout occurs without taking the label gaps into consideration.
This is why endless media are most suitable for this purpose.
Device list
Pronto 486 - 10/09/2007 -15:14:17
Fir m w a re V 3.11 ( A ug 9 2007) - #111070553751
N am e Description
CPU Thor, #111070553751
PCB-Rev. 7, CPU-Rev. 4
TPH 300 dpi, 1248 dots
I/F1 Ethernet 10/100 MBit/s
M A C: 00:02:E7:02:28:F4
I/F2 U S B 2.0 Device
I/F3 R S -232
IFF S 8MB
U S B [1] Generic/Generic Hub
[0] Full Rev. 3.00
Mfr: 03EB,Cl a ss: 09/00,Protocol: 00, Ph a se: 20/0
U S B [2]
[1/1] Low #7-5037793,Rev. 1.05
Mfr: 0985,Cl a ss: FF/00,Protocol: FF, Ph a se: 20/4
U S B [3] cab/ Frontp a nel
[1/3] Full Rev. 2.05
Mfr: 0985,Cl a ss: FF/1C,Protocol: 00, Ph a se: 20/1
a bc licensed under A rtistic license fro m Ya b a sic 2.715 (www.y a b a sic.de)
CMU- S NMP © 1988-89 C a rnegie Mellon University,© 1995 Glenn W a ters
j TreeT a ble © 1997-1999 S un Microsyste m s, Inc. A ll Rights Reserved
Portions of this softw a re a re © 2005 The FreeType Pro j ect
(www.freetype.org). A ll rights reserved.
m DN S Responder © 2002-2006 A pple Co m puter Inc. A ll Rights Reserved
Licensed under the A p a che License, V ersion 2.0