QuickLabel Systems pronto! 482, Руководство пользователя

Страница: 203 / 256

Pronto! 482/486/682/863 12-7
Font list
1 Insert printable medium (labels, endless paper) which extends across the
entire printing width.
2 If the printout is to occur using thermal transfer printing, insert transfer
ribbon with the maximum width.
3 Press the menu button.
4 Select Test > Font list menu.
5 Start printout with the
↵
button.
You can cancel the printout with the cancel button.
The parameters have the following meaning:
The Font list function prints the most important parameters of
the fonts available in the printer in tabular form. The table
contains both the original fonts in the printer and other fonts
loaded into the printer. The printout occurs using the heat level
and print speed specified in the Setup > Print param. menu.
Note: The printout occurs without taking the label gaps into consideration.
This is why endless media are most suitable for this purpose.
Column Meaning
No. ID number of the font required for programming
(command T).
Name Name with which the font is saved internally.
Font list
Pronto 486 - 10/09/2007 -15:08:36
Fir m w a re V 3.11 ( A ug 9 2007) - #111070553751
No. N am e Type Description
-1 _DEF1 Bit ma p Def a ult Font 12x12 dots
-2 _DEF2 Bit ma p Def a ult Font 16x16 dots
-3 _DEF3 Bit ma p Def a ult Font 16x32 dots
-4 OCR_ A _I Bit ma p OCR- A S i z e I
-5 OCR_B Bit ma p OCR-B
3 B X 000003 TrueType S wiss 721
4 B X 000005 TrueType Swiss 721 Bold
596 B X 000596 TrueType
Monospace 821