1
Quickcrop Steel Fruit Cage Assembly Instructions
1 - Check pack contents. For custom orders the parts list will be on the invoice. For standard
cages the parts list is displayed under ‘specification’ on the relevant product page.
2 - Mark out the post hole locations. The easiest way to do this is to temporarily build the roof
section; this may seem like unnecessary extra work but it is well with it as it removes any
possibility for error.
The roof section is a grid made up of roof bars connected by clamp fittings. There are 3 types of
fittings used to build the roof as follows:
3 way corner fittings
- Place these fittings at the corners of your grid.
4 Way fittings
- Place around the perimeter of your grid where 2 poles meet.
5 Way fittings
- Place in the center of your grid where 4 poles meet. 5 way fittings are only
required for cages over 2 bays deep.
