background image

4

CHARACTERISTICS AND OPERATION

GB

RRC PW94-PT94 - REV000A

1

3

2

4

WARNING:

 the transmitter needs to be programmed in the receiver’s memory. To do this, follow the procedure shown in 

the reveiver’s user manual.

Power supply

The pocket transmitter is powered using a lithium CR2450 battery. To replace it, see the BATTERY REPLACEMENT paragraph.

Enabling

The RRC Thruster pocket transmitter is enabled by keeping both        keys pressed for the PW94 model and 

1

 

   

2

 

 

keys pressed for the PT94 model.
Once they have been pressed, the orange transmission LED fi rst starts fl ashing at regular intervals and then starts 
fl ashing more quickly. After they have been released, the transmission LED will communicate through brief fl ashes that 
enabling has taken place.

Operational status

When any of the transmitter keys is pressed, the green transmission LED flashes quickly to signal that transmission has taken 
place. Each key pressed corresponds to the activation of a relay (or 2 relays) on the receiver, which will stay active as long as 
the key isn’t released.

RRC THRUSTER POCKET RADIO TRANSMITTER 

The RRC Thruster pocket transmitter is a device which combined with a RRC radio receiver is used to control Quick thrusters 
installed on recreational crafts.

The RRC radio system for thrusters must be used as a supplement to the Quick wired thruster control system already installed 
on the boat.

Take necessary steps in order to avoid that malfunctioning of the RRC Thruster radio control system may cause damage 
to people, animals or property.

The advantages offered by the RRC Thruster pocket radio transmitter are:

• Microcontroller-operated functions.
• Operating temperatures from -15°C to +70°C.
• FSK modulation and carrier frequency 913.7 Mhz.
• LED indication of operational status, low battery and transmission feedback.
• Floating.

INSTALLATION

BEFORE USING THE RADIO TRANSMITTER, CAREFULLY READ THIS USER MANUAL. IN CASE OF 
DOUBTS PLEASE CONTACT THE RETAILER OR QUICK

®

 CUSTOMER SERVICE.

This device was designed and constructed for use on recreational crafts. 
Other forms of use are not permitted without written authorization from the company Quick

®

.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the 
user’s authority to operate the equipment.

The RRC Thruster pocket radio transmitter has been designed and manufactured for the purposes described in this user 
manual. Quick

®

 is not liable for direct or indirect damages caused by an improper use of the radio control, due to an incorrect 

installation or errors possibly present in this manual.

THE PACKAGE CONTAINS:

 pocket radio transmitter with battery included - lanyard - conditions of warranty - the present 

manual of installation and use.

F

Transmission LED

Pocket transmitter 

model PW94

model PT94

F

Содержание PT94

















Отзывы: