INSTALLATION AND USE MANUAL
QUICK MC²X 30k
- REV002D
49
EN
30k
STRICTLY OBSERVE ALL PRECAUTIONS INDICATED IN THE MANUAL IN ORDER NOT TO
DAMAGE YOURSELF AND THE STABILIZER.
IF IN DOUBT, CONTACT YOUR NEAREST “QUICK
®
” DEALER.
10 - Maintenance
10.3 - Annual Maintenance
10.4 - External Cleaning
Clean the stabilizer with a soft cloth dampened with water; do not use chemicals or abrasives.
SYSTEM / COMPONENT
ACTIVITY
PERIODIC
MECHANICAL
CHECK THE STABILIZER FOR CORROSION OR RUBBING MARKS. (FIGURE A)
ANNUAL
ELECTRICAL
CHECK THE CONNECTORS FOR CORRECT FIXING AND THE PRESENCE OF OXIDE.
ANNUAL
HYDRAULIC
REMOVE THE TOP COVER AND CHECK FOR OIL LEAKS. (FIGURE B)
ANNUAL
FIXING
CHECK THAT THE SCREWS FIXING THE STABILIZER TO THE HULL ARE TIGHTENED
CORRECTLY (FIGURE C).
THE VALUES ARE INDICATED ON PAGE 41
ANNUAL
Annual maintenance can be carried out independently.
There are no indications/warnings via the RC Remote Control.
Refer to the annual maintenance chart below.
Annual maintenance table
Use the torque wrench to tighten the bolts.
Refer to Nm on page 41
MC²X 30k n.12 bolts
A
B
C
SYSTEM / COMPONENT
ACTIVITY
PERIODIC
MECHANICAL
Replace silent block and precession sensor belt
5 years
Maintenance table (5 years)
