Quick MC2 Series, Инструкция по установке и эксплуатации

Страница: 32 / 40

32
EN
INSTALLATION AND USE MANUAL QUICK MC² X3_DC REV001A
DC
10 - Maintenance
10.2 - Periodic Maintenance
Periodic maintenance, every 2000 hours , must be performed by personnel authorized by Quick
®
.
The Remote Control alerts, through a window (image below) that periodic maintenance must be performed.
The window appears in the middle of the screen. To close, press OK.
The wrench icon remains visible until maintenance is performed; despite the maintenance notice, the stabilizer will
continue to operate.
Active maintenance notification
• Contact the
Quick
®
service to perform maintenance as soon as possible.
• In the event of problems with the machine due to lack of maintenance, the warranty is void during the notification
period and
Quick
®
assumes no liability for any problems with the MC² .
• Once maintenance has been performed by a Quick
®
technician, the icon will be reset.
Periodic maintenance table
SYSTEM / COMPONENT ACTIVITY PERIODIC
BEARINGS CONTACT THE QUICK TECHNICAL SERVICE EVERY 2000 HOURS
INVERTER CONTACT THE QUICK TECHNICAL SERVICE EVERY 2000 HOURS
PRECESSION CONTACT THE QUICK TECHNICAL SERVICE EVERY 2000 HOURS
0
25
-25
-50 50
75 -75