6
6.Installation and Connection
6.1 Installation
The handle holder must be installed when the product is used for the first time, as shown
below.
1) Remove two screws on the left side of the holder.
2) Place the mounting hole of the handle holder on the two screw holes on the product and
install two screws and tighten them.
3) Install the handle holder and put the handle on the holder, then check whether they are
well fit.
Note: The handle holder can be installed on the left or right side of the product
according to actual needs.
6.2 Connection
Connect the AC power supply, and power on it to start work.
