background image

quest

quest

1-866-413-5214

Quest Oil Fired CHH-980  Installation, Operation and Maintenance Instructions

  

30

www.QuestProtect.com

[email protected]

Quest CHH-980 Limited Warranty 

Warrantor:

Therma-Stor LLC 
4201 Lien Rd. 
Madison, WI 53704 
Telephone: 1-866-413-5214

Who Is Covered: This warranty extends only to the original end-user of the Quest CHH-980 and may 
not be assigned or transferred.

One Year Warranty: Therma-Stor LLC warrants that, for one (1) year the Quest CHH-980 will operate 
free from any defects in materials and workmanship, or Therma-Stor LLC will, at its option, repair or 
replace the defective part(s), free of any charge.

End-User Responsibilities: Warranty service must be performed by a Servicer authorized by Therma-
Stor LLC. If the end-user is unable to locate or obtain warranty service from an authorized Servicer, 
the end-user should call Therma-Stor LLC at the above number and ask for the Therma-Stor Service 
Department., which will then arrange for covered warranty service. Warranty service will be performed 
during normal working hours.

The end-user must present proof of purchase (lease) upon request, by use of the warranty card or 
other reasonable and reliable means. The end-user is responsible for normal care. This warranty does 
not cover any defect, malfunction, etc. resulting from misuse, abuse, lack of normal care, corrosion, 
freezing, tampering, modification, unauthorized or improper repair or installation, accident, acts of 
nature or any other cause beyond Therma-Stor LLC’ reasonable control.

Limitations and Exclusions: If any Quest CHH-980 part is repaired or replaced, the new part shall be 
warranted for only the remainder of the original warranty period applicable thereto (but all warranty 
periods will be extended by the period of time, if any, that the Quest CHH-980 is out of service while 
awaiting covered warranty service).

UPON THE EXPIRATION OF THE WRITTEN WARRANTY APPLICABLE TO THE QUEST CHH-
980 OR ANY PART THEREOF, ALL OTHER WARRANTIES IMPLIED BY LAW, INCLUDING 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL ALSO EXPIRE. ALL 
WARRANTIES MADE BY THERMA-STOR LLC ARE SET FORTH HEREIN, AND NO CLAIM MAY 
BE MADE AGAINST THERMA-STOR LLC BASED ON ANY ORAL WARRANTY. IN NO EVENT 
SHALL THERMA-STOR LLC, IN CONNECTION WITH THE SALE, INSTALLATION, USE, REPAIR OR 
REPLACEMENT OF ANY QUEST CHH-980 OR PART THEREOF BE LIABLE UNDER ANY LEGAL 
THEORY FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES INCLUDING WITHOUT 
LIMITATION WATER DAMAGE (THE END-USER SHOULD TAKE PRECAUTIONS AGAINST SAME), 
LOST PROFITS, DELAY, OR LOSS OF USE OR DAMAGE TO ANY REAL OR PERSONAL PROPERTY.

Some states do not allow limitations on how long an implied warranty lasts, and some do not allow 
the exclusion or limitation of incidental or consequential damages, so one or both of these limitation 
may not apply to you.

Legal Rights: This warranty gives you specific legal rights, and you may also have other rights which 
vary from state to state.

Содержание PowerHeat 980 Pro CHH-980































Отзывы: