Quest Engineering MPS 3, Руководство по эксплуатации, Страница: 239 / 268

MPS 3 System – System Maintenance
12.1.3.Water Circulation System Cleaning
The MPS 3 System water circulation system must be
disinfected prior to its first use, while in operation, and
while in storage at a frequency of 28 days.
DO NOT use bleach or any chlorine based cleaning
solutions in the MPS 3 circulation system. Chlorine may
damage the heat exchanger, resulting in water to blood
leakage AND possible patient injury.
Other disinfectants with the same active ingredients may
contain different additives which can influence the material
compatibility. Thus the use of any other disinfectant is
explicitly not recommended.
Immediately remove from service any device that show
discoloration or cloudiness in the water hoses which may
indicate bacterial growth. Consult hospital infection control
for further action. Replace hoses that connect to external
devices annually at a minimum to minimize biofilm
formation.
Do not leave the MPS disposable Heat exchanger primed
with water for a prolonged time as this may damage the
heat exchanger, resulting in water to blood leakage AND
possible patient injury.
Use Minncare HD to clean and disinfect the MPS 3 console
water circulation system. Follow all manufacturer’s
recommendations for preparation, storage, and disposal of
disinfection solution. Rinse MPS 3 per this IFU after
disinfecting.
The cleaning mode may be accessed by selecting H2O CIRC
from the MENU screen.
Prior to cleaning the water circulation system, ensure that
the delivery set and accessories have been removed, the
hypothermic reservoir has been drained and the water
circuit adapter has been installed.
5