DR4300 Owners Manual
Replacing the optional internal USB memory key
124
See also:
After working inside your system
Related references
See also:
Internal USB memory key (optional)
An optional USB memory key installed inside your system can be used as a boot device, security key, or mass
storage device.
To boot from the USB memory key, configure the USB memory key with a boot image and then specify the USB
memory key in the boot sequence in System Setup.
The internal USB port must be enabled in
Internal USB Port
option in the
Integrated Devices
screen of
System
Setup
.
NOTE:
To locate the internal USB port
(INT_USB)
on the system board, see the
System board jumpers
and connectors
section.
Replacing the optional internal USB memory key
CAUTION:
Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is not
authorized by Dell is not covered by your warranty. Read and follow the safety instructions that are
shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
1. Locate the USB port or USB memory key on the system board.
To locate the USB port, see the
System board jumpers and connectors
section.
2. If installed, remove the USB memory key from the USB port.
Figure 53. Removing the internal USB memory key
a. USB memory key
b. USB port
3. Insert the replacement USB memory key into the USB port.
Figure 54. Installing the internal USB memory key
Содержание DR4300e
Страница 1: ...DR4300e System Owner s Manual ...
Страница 181: ...DR4300 Owners Manual 181 Index ...
