DL4300 Appliance
Loading drivers to the operating system
351
▪ Cloud path
5. Click Next.
6. On the Machines page, select the machine you want to restore, and then click Next.
7. On the Recovery Points page, select the recovery point you want to use to restore the machine, and then
click Next.
8. On the Mapping page, select one of the following options, and then complete the corresponding steps:
•
From the Volume Mapping drop-down list, select Automatic.
1. In the left table, verify that the appropriate volumes are listed and are selected.
NOTE:
Typically for a BMR, you should restore, at minimum, the system reserved
volume and the system volume (usually, but not always, the
C:\
volume). You must
select at least one volume to perform a BMR.
2. In the right table, select the disk or disks to which you want to map volumes on the target machine.
•
From the Volume Mapping drop-down, select Manual.
NOTE:
To manually map disks, you must first use DiskPart on the Command Line to create and
format target volumes. For more information, see
DiskPart Command-Line Options (Standard 7
on the Microsoft Developer Network.
NOTE:
If no volumes exist on the drive of the machine on which you are performing a bare metal
restore (BMR), you cannot see this option or manually map volumes.
▪
Under Destination Volumes, from the drop-down menu, select the appropriate target volume for each volume
in the recovery point.
9. In the mount maps path text box, enter a destination for the temporary storage of mapping files.
The default location is
X:\ProgramData\AppRecovery\IndexEntriesMaps
.
NOTE:
To ensure that your destination has sufficient free space, divide the total mount volume
capacity by 1,024. For example, using the formula
(Mount volume total capacity) / 1024
= Free space
, then
1 TB / 1024 = 1 GB
.
10. Click Restore.
The URC maps the volumes to the new disk or disks.
11. Click Restore.
The URC restores the data to the target machine. You can view the progress on the Restore progress tab.
12. After the restore is complete, remove the boot CD.
13. To boot the BMR target machine into Windows, restart the machine.
Parent topic
Loading drivers to the operating system
This procedure describes how to load drivers to the operating system on a bare metal restore (BMR) target.
Содержание DL4300
Страница 1: ...DL4300 Appliance User Guide...
