Quectel NB-IoT Module Series, Руководство пользователя

Страница: 20 / 31

NB-loT Module Series
BC660K-GL-TE-B User Guide
BC660K-GL-TE-B_User_Guide 19 / 30
SB63
SB62
SB14 SB13
Figure 8: Interface Diagram of STM32 Nucleo-64 Used with BC660K-GL-TE-B (Bottom View)
3.2.2.
Operation Procedure for Using Multi-Boards
1.
Install a driver for STM32 Nucleo-64 board; the driver can be downloaded from the following link:
http://www.st.com/content/st_com/en/products/evaluation-tools/product-evaluation-tools/mcu-eval-
tools/stm32-mcu-eval-tools/stm32-mcu-nucleo/nucleo-l476rg.html;
2.
Install a USB-UART driver, which can be downloaded from the following link:
https://www.ftdichip.com/Drivers/VCP.htm
3.
Remove the two 0 Ω resistors (SB13 and SB14) with a soldering iron, and then solder them onto SB62
and SB63 respectively;