LTE Module Series
EP06&EG06&EM06 GNSS AT Commands Manual
EP06&EG06&EM06_GNSS_AT_Commands_Manual
11 / 29
2.1.4. AT+QGPSCFG="glonassnmeatype" Configure Output Type of GLONASS
NMEA Sentences
Parameter
2.1.5. AT+QGPSCFG="galileonmeatype" Configure Output Type of Galileo NMEA
Sentences
AT+QGPSCFG="glonassnmeatype" Configure Output Type of GLONASS NMEA
Sentences
Write Command
AT+QGPSCFG="glonassnmeatype"[,
<glonassnmeatype>]
Response
When there are two parameters:
OK
When the second parameter is omitted, query the current
setting:
+QGPSCFG: "glonassnmeatype",<glonassnmeatype>
OK
If there is any error related to ME functionality:
+CME ERROR: <errcode>
Reference
<glonassnmeatype>
Configure output type of GLONASS NMEA sentences by ORed, and the
configuration parameter will be automatically saved to NVRAM. The default
value is 0.
0 Disable
1 GSV
2 GSA
4 GNS
<errcode>
Integer type. The error code of the operation. If it is not 0, it is the type of error.
Please refer to
Chapter 4
for details.
AT+QGPSCFG="galileonmeatype" Configure Output Type of Galileo NMEA
Sentences
Write Command
AT+QGPSCFG="galileonmeatype"[,<
galileonmeatype>]
Response
When there are two parameters:
OK
