GNSS Module Series
LC76F_EVB_User_Guide 10 / 26
Table 2: List of Kit Components
2.2.
Connecting Cables and Antenna to EVB
The connection between the EVB and its accessories is shown in the figure below. For detailed information
on how to connect the EVB and its accessories, refer to the instruction sheet inside the EVB Kit.
Figure 2: EVB and Components Assembly
Items
Description
Quantity
EVB
Evaluation Board
Size: 60 mm × 70 mm
1
USB Cable
Micro-USB Cable
1
USB Flash Drive
8 GB USB Flash Drive (including the module-related
documents, tools and drivers)
1
GNSS Antenna
Active GNSS Antenna
Request the Antenna Datasheet from Quectel Technical
Support.
1
Instruction Sheet
Sheet providing instructions on how to connect the EVB
and its components, detailed information on EVB
contents, etc.
1
Other
Bolts and Coupling Nuts
4 pairs
