Quectel BC660K-GL Скачать руководство пользователя страница 11

Страница: 11 / 58

NB-IoT

Module Series

BC660K-GL Hardware Design

BC660K-GL_Hardware_Design 10 / 57

Product Concept

2.1. General Description

BC660K-GL is a high-performance NB-IoT module with extremely low power consumption. It is designed

to communicate with infrastructures of mobile network operators through NB-IoT radio protocols 3GPP

Rel-13 and Rel-14. BC660K-GL supports a broad range of frequency bands as listed below.

Table 1: Frequency Bands of BC660K-GL

BC660K-GL is an SMD type module with LCC and LGA package, and has an ultra-compact profile of

17.7 mm

15.8 mm

2.0 mm, which makes it easily embedded into size-constrained applications and

provide reliable connectivity with the applications.

BC660K-GL provides abundant external interfaces (UART, ADC, USIM, etc.) and protocol stacks

(UDP/TCP/LwM2M*/MQTT*, etc.), which facilitates the module

’s application.

The module

’s compact form factor, ultra-low power consumption and extended temperature range makes

it one of the best choices for a wide range of IoT application, such as smart metering, bike sharing, smart

wearables, smart parking, smart city, home appliances, security and asset tracking, agricultural and

environmental monitoring, etc. It also provides a complete range of SMS* and data transmission services

to meet various user demands.

The module fully complies with the RoHS directive of the European Union.

“*” means under development.

Mode

BC660K-GL

H-FDD

B1/B2/B3/B4/B5/B8/B12/B13/B14/B17/B18/B19/B20/B25/B28/B66/B70/B85

NOTE

Содержание BC660K-GL



























































Результаты поиска

Содержание BC660K-GL

Отзывы:

Похожие инструкции для BC660K-GL

Бренды по названию

Популярные бренды

Quectel BC660K-GL, Руководство пользователя

Результаты поиска

Содержание BC660K-GL

Отзывы:

Похожие инструкции для BC660K-GL

Бренды по названию

Популярные бренды