Quectel BC66 Скачать руководство пользователя

Страница: 10 / 58

NB-IoT Module Series

BC66 Hardware Design

BC66_Hardware_Design 9 / 57

Product Concept

2.1. General Description

BC66 is a high-performance NB-IoT module with extremely low power consumption. It is designed to

communicate with infrastructures of mobile network operators through NB-IoT radio protocols (3GPP

Rel.13 and 3GPP Rel.14*). BC66 supports a broad range of frequency bands as listed below.

Table 1: Frequency Bands of BC66 Module

BC66 is an SMD type module with LCC package, and has an ultra-compact profile of 17.7mm

15.8mm

2.0mm. These make it can be easily embedded into size-constrained applications and provide reliable

connectivity with the applications.

BC66 provides abundant external interfaces (UART, SPI*, ADC*, NETLIGHT*, etc.) and protocol stacks

(UDP/TCP, LwM2M, MQTT, etc.), which provide great convenience for customers' applications.

Due to compact form factor, ultra-low power consumption and extended temperature range, BC66 is a

best choice for a wide range of IoT applications, such as smart metering, bike sharing, smart wearables,

smart parking, smart city, home appliances, security and asset tracking, agricultural and environmental

monitoring, etc. It is able to provide a complete range of SMS* and data transmission services to meet
customers’ demands.

The module fully complies with the RoHS directive of the European Union.

“*” means under development.

Mode

BC66

H-FDD

B1/B2/B3/B4/B5/B8/B12/B13/B17/B18/B19/B20/B25/B26*/B28/B66

NOTE

Содержание BC66



























































Результаты поиска

Содержание BC66

Отзывы:

Похожие инструкции для BC66

Бренды по названию

Популярные бренды

Quectel BC66, Проектирование аппаратного обеспечения

Результаты поиска

Содержание BC66

Отзывы:

Похожие инструкции для BC66

Бренды по названию

Популярные бренды