GV50VC User Manual
TRACGV50VCUM00116
4.
Troubleshooting and Safety Info
4.1.
Troubleshooting
Trouble
Possible reason
Solution
After GV50VC is turned on, the CELL LED
always flashes quickly.
GV50VC doesn’t
registered to the ISP
Please register the
GV50VC again and
make sure the device
get the correct MDN.
The signal is too
weak; GV50VC can’t
register to the
network.
Please move GV50VC
into places with good
CDMA coverage.
Messages can’t be reported to the
backend server by CDMA.
The IP address or port
of the backend server
is wrong.
Make sure the IP
address for the backend
server is an identified
address on the Internet.
Unable to power off GV50VC.
Unable to power off
GV50VC if charger is
connected.
Disconnect charger, and
try again.
GV50VC can’t get successful GPS fixing.
The GPS signal is
weak.
Please move GV50VC to
a place with open sky.
It is better to let the top
surface face the sky.
(The same surface with
indication LED)
4.2.
Safety Info
Please do not disassemble the device by yourself.
Please do not put the device on overheating or too humid place, and avoid exposure to
direct sunlight. Too high temperature will damage the device or even cause battery
explosion.
Please do not use GV50VC on the airplane or near medical equipment.
RF Exposure Statement:
For the product,under normal use condition is at least 20cm away from the b ody of the user
,the user must keeping at least 20cm distance to the product.
