Queclink GB100CAU, Руководство пользователя

Страница: 8 / 12

GB100CAU User Manual
4. Getting Started
4.1. Opening the Case
Insert the triangular-pry-opener into the gap of the case as shown below, push the opener up
until the case unsnapped.
Figure 2. Opening the Case
4.2. Closing the Case

Make sure the silicon rubber seal ring is in the gap of front case.

Put the power cable wire holder in the rubber groove of rear case.

Place the cover on the bottom in the position as shown in the following figure. Press the
cover until it snapped (press the CEL antenna side firstly).
Figure 3. Closing the Case
QSZTRACGB100CAUUM0100 5