PiXtend eIO Hardware Manual
6.2.2.Terminal Blocks
The terminal blocks on PiXtend eIO are industrial terminals with push-in technology (tool-
free) and defined contact force, which ensure a long-term stable connection.
Cables with wire end ferrules or rigid wires can be plugged in directly (without tools or
actuation pushers). The lines are always released via the actuating push button.
Connection data
Value
Comment
cable cross-section
min. - max.
0.2 mm² – 1.5 mm²
for rigid and flexible lines
cable cross-section with
with wire end ferrule
min. - max.
0.25 mm² – 1 mm²
for flexible lines
wire end ferrules without
plastic collar
0.25 mm² – 0.75 mm²
for flexible lines
wire end ferrules with plastic
collar
cable cross-section AWG
max. - min.
16 - 24
Table 12: Technical data - terminal blocks
The clamps come from German production (WAGO or Phoenix Contact).
www.pixtend.com
Copyright by Qube Solutions GmbH
74 / 119
