© Quatro Air Technologies| MAY 2019 | All rights reserved |
iVAC Premium Series Operation and Maintenence Manual
Page 10
Controls
Controls
Important Notes for Proper Function of Controls
•
Do not connect the power cord to an outlet that is controlled by a switch.
•
Never use any form of remote control that switches the power source on and off. In doing so, serious damage to the
controls and motors may occur. Contact QUATRO if power switching is the only way you have to remotely control the
unit.
•
Quatro Air has many power switching adapters available for SAFE and reliable control.
iSeries Controls and Alarms/Status Conditions
The iSeries controls feature soft touch Power (On/Off), Speed Up and Speed Down Buttons. It also features a series of
LEDs that indicate the status of the filter(s) and motor(s) and inform you of any alarms. These alarms are accompanied by
an audible alert. See the table on the following page to understand the meanings of the LEDs and the alarms.
Alarm Mute Feature
All alarms can be muted for a period of 8 hours OPERATING TIME. After 8 hours the alarm will return and can be muted
again.
When mute is enabled, L1 Flashes and the muted alarms stay SOLID. The level of the alert will not be displayed until the
8 hour mute period is over.
To mute:
• Press
SPD UP
and
DN
quickly at the same time.
When the buttons are released the alarm(s) will mute and L1 will start flashing. Alarm LED will go SOLID.
1.
System ON Led
2. Service
Motor(s) LED
3. Service Filters
LED
4. Automatic Filter
Cleaning LED
5. Remote/
Standby LED
(L5)
