Quatech Freedom USB Adapter User’s Manual
Installing the software
Step
Procedure
Description
Step 15
Make sure that the Quatech installation
CD is still in your CD-ROM drive.
This is the CD that shipped with the
Freedom USB.
Step 16
If necessary, browse or use the down
arrow to map to the correct driver
location.
Click the Next button.
The complete path is E:\Serial Port
Adapters\Drivers\Windows 95, 98, Me,
2000, XP for USB\Enhanced.
Replace E: with your CD-ROM drive
designation.
The Ready to install prompt displays.
Figure 35 - Win 98/98SE Ready to install prompt
Step
Procedure
Description
Step 17
Confirm that the device and driver
location are correct.
Click the Next button.
If necessary, use the Back button to
return to the previous screen.
Windows copies the appropriate files
from the CD, then displays the Finished
installing software prompt.
Figure 35 shows the 98/98SE
Ready to install the prompt,
which lets you double-check
the device that you are
installing and the location of
the driver.
Rev 2.02 (2/24/2004)
Page 27
