SETUP
INSTRUCTIONS
3
15
Make sure the power is correct for your region. Check the power strip in the equipment. If
you are in a 220VAC area and the power strip inside the cabinet is a USA style power strip
(not-universal), you will need to replace the power strip with the multi-country power strip
included.
Locate the bolt holes on the left and right underside of shelf. Insert and tighten 2 bolts
longer bolts (55mm) and washwers between top of base unit and bottom of top unit as
shown, and tighten with wrench.
Insert two shorter bolts (40mm) with
washer in each side panel bracket
as shown and tighten with a wrench.
Repeat for both sides (4 bolts, 4
washers total used).
FOR 220VAC OPERATION
If the power strip inside the cabinet is a USA style power strip and you are operating outside the
USA with 220VAC to 250VAC power line, you must use the multi-country power strip.
Step 1
: Open the lower back door. Unplug all of the cables from the power
strip (sound system, power supply).
Step 2
: Using a screwdriver, remove the power strip at the bottom of the
cabinet and unplug it from the internal IEC outlet.
Step 3
: Replace the power strip with the multi-country outlet.
Step 4
: Reconnect the sound system and power supply cables.
INCORRECT
CORRECT
WARNING
WARNING
Fig. 3.1I
6
7
8
Содержание GAME GATE VU
