www.quartix.com/ie
+353 1 691 7006
5
Step 1: Installation
With the engine switched off, simply plug the
unit into the 16-pin diagnostic port connector.
4
It may require firm pressure to mate with
the connector. Leave the unit in position with
the vehicle’s doors open for approximately
five minutes (to acquire GPS data) before
proceeding to Step 2. Replace any trim after
inserting the unit.
Step 2: Pairing the device
Switch the ignition on (with engine running) and
leave this on for approximately two minutes.
Then switch off the engine and remove the
ignition key. Log on to the Quartix tracking
app to ensure your vehicle appears on the live
tracking map.
4
Support and Questions
If you have any questions during
installation, please contact our Support
team through our online form, by emailing
Compatibility and Safety
Summary
The TCSV12 is designed for 12v cars and light
commercial vehicles. The device cannot be
plugged into 24v vehicles fitted with a Type B
diagnostic connector. After installation, you
should check that the device does not impede
or affect the driver’s operation or control of the
vehicle in any way. If it does, then remove the
product and contact Quartix in order for us to
make alternative arrangements.
The product must not be opened. It contains
a Lithium Polymer battery and there are no
user-serviceable items inside the product.
Any repair or disposal of the product must be
carried out by Quartix. If the unit experiences
any operational problems, contact our Support
team and they will arrange for the product to be
replaced. The TCSV12 includes an internal 2A
fuse. The vehicle diagnostic port also includes
a fused 12v power feed. The TCSV12 has been
independently tested and meets all relevant
CE (EMC) and VCA e-mark compliance. The
product is designed to operate from -30°C to
+80°C. The internal Lithium Polymer battery will
only charge between 0°C to +40°C.
