User Manual
– DynaLAL
3. Cleaning
The mattress should be cleaned on the bed weekly using a damp soft cloth and mild detergent. If the top or
bottom cover becomes severely soiled, remove, clean as follows, and replace with a clean cover. Covers can
be washed and thermally disinfected in a washing machine. Cover should not be put into a dryer. (
Never use
phenol-based cleaning solutions)
Industrial cleaning
Break wash
cold
10 min
Main wash
60C
6 min
Main wash
70C
10 min
Extraction
2 min
3 cold rinses
Extraction
5 min
Domestic cleaning
Pre-wash
cold
Main wash
70C
10 min
Extraction
2 min
Cold rinses
TUMBLE DRYING OR TUNNEL DRYING IS NOT RECOMMENDED
Mattress cells can be wiped with a solution of sodium hypochlorite 1000ppm or any other non-phenolic
germicidal solution.
Note:
The control unit should also be cleaned weekly using a damp soft cloth and mild detergent
(Switch off
the electrical supply to the pump and disconnect the power cord from the main supply before cleaning
and inspection).
The Pump
: The casing of the pump is manufactured from ABS plastic. If soiled it can be wiped down with a
sodium hypochlorite solution to dilution of 1000ppm or any EPA-approved, hospital-grade disinfectant.
(Do not use phenol based cleaning solutions)
