Quantum StorNext M330, Руководство по оборудованию

Страница: 55 / 60

Chapter 3: Basic System Operations
Additional Common Operations
StorNext M330 Metadata Appliance Hardware Guide 51
9 Type the sudo rootsh command to grant root user privileges after
entering the password for the stornext user account again when
prompted.
10 From the command line, update the VIP Address using the following
command (refer to the vip_control man page or the StorNext Man
Pages Reference Guide for information on changing the address).
11 To update the firewall rules for the MDC node operating as the
primary, type the following:
StorNext Operations
For more information on performing advanced StorNext operations,
refer to the following within this document or by accessing documents
from the StorNext M330 GUI:
• For information on how to monitor the hardware components for
both MDC nodes, refer to the “The Hardware Status Report” section
of the latest version of the
StorNext User’s Guide
.
• For instructions on how to capture system state logs and support
bundles, refer to the “The Capture State Function” section of the
latest version of the
StorNext User’s Guide
.
• For instructions on how to capture DSET logs, refer to the “Capture
DSET” section of the latest version of the
StorNext User’s Guide
.
• For information on changing the network configuration, refer to the
“Step 3: System” section of the latest version of the
StorNext User’s
Guide
.
• For information on setting up the distributed data mover (DDM)
feature, refer to “Distributed Data Mover (DDM)” section of the
latest version of the
StorNext User’s Guide
.
• For information on StorNext Advanced Reporting, refer to the
StorNext Advanced Reporting User’s Guide
.
vip_control
/opt/DXi/scripts/netcfg.sh --reset_snvip