6-68095-01 Rev A, December 2013
*6-68095-01 A*
© 2013 Quantum Corporation. All rights reserved. Quantum, the Quantum logo, DLT, DLTtape, the DLTtape logo, SuperLoader,
Scalar, DXi, StorageCare, StorNext, GoProtect, and Vision are registered trademarks of Quantum Corporation and its affiliates
in the United States and/or other countries. All other trademarks are the property of their respective owners. Quantum
specifications are subject to change.
Quantum Scalar LTFS
Appliance:
Power Supply Replacement
The Scalar Linear Tape File System (LTFS) Appliance is powered by two
redundant, “hot-swappable” power supplies located in the back of the unit.
Once the failed power supply is identified, the power supply can be easily
replaced and the Scalar LTFS Appliance returned to normal operation. Always
replace faulty power supplies to ensure redundant operation.
To replace the power supply, refer to the following sections:
•
Preparing to Replace a Power Supply
on page
2
•
Removing a Failed Power Supply
on page
3
•
Replacing a Failed Power Supply
on page
3