Scalar i6000 Installation Guide
323
Verification Test Logs
Each verification test produces a test log that details all information and results from the individual tests and
subtests. In addition, the log includes information to help you understand the test results and to help resolve
any problems encountered. To view a test log, click
Reports
on the
Verification Tests
dialog box to display
the report window, and then click the
Text
tab.
You can view results for the five most recent tests. Click
Reports
, and then click the test results you want
to view.
This log file is appended with data as each test finishes. You can repeat the test if any problems are found
and fixed. If the
Verification Tests
dialog box was not closed during the retesting, all results are contained
in one log file.
To save the information that the test generates, click
Send
. If you are using the remote LMC client, you can
choose to save the log to your hard drive. If you choose to save directly to your hard drive, the report listing
and test log are combined into one text file.
shows an example of a test log. It provides the following information:
•
The test output is from the library alignment test.
•
The test title is always shown between rows of equal signs.
•
A brief guide for understanding coordinates and offsets used in the test results is provided near the
beginning of the log.
•
The X-axis and Y-axis limits applied by this test are shown. MARGINAL output is placed between
parentheses, and FAILED output is placed between brackets; for example, (30) and [45].
•
The results of the subtest are displayed between dashed lines.
•
Coordinates are represented as A (aisle), F (frame), R (rack), S (section), C (column), and R (row).
•
All location values are in 0.1 mm.
•
All results that you should review are identified with four arrows (>>>>) in the column to the left of
the detailed results.
•
At the end of every test, summary results of every subtest are given. The overall test result is
displayed between asterisk lines, and a summary of subtest results follows. See
313 to determine the meaning of the results.
Содержание Scalar i6000
