Quantum Scalar 50, Руководство пользователя

Страница: 104 / 290

Chapter 3 Quantum Scalar 50 Remote Management
Operations
Quantum Scalar 50 User’s Guide 80
Select Map
3
The select map section allows the user to view the library in either a
physical or logical view. To toggle between physical and logical map,
click the
Physical/Logical Map
button in the map section.
Physical Map:
A physical view displays a high level physical
representation of the library. Slots, magazines, drives, and fixed slots are
displayed as a panel located on either the left, rear, or right wall of the
library. Clicking on the panel name opens a zoom view of the panel (i.e.
similar to pulling out a loadport or drawer) displaying all elements (slots,
ports, or drives) in a spreadsheet format.
Logical Map
: A logical map displays slots, magazines, drives, and fixed
slots. Clicking on the panel name opens a zoom view of the panel (i.e.
similar to pulling out a loadport or drawer) displaying all elements (slots,
ports, or drives) in a spreadsheet format. From the zoom view, clicking
on an element opens a detail window.
Move Page
3
The
Move
page allows the user to move a single cartridge from a source
(slot, port, drive, or address) to a destination (slot, port, drive, or
address).
To access the
Move
page, from the
Operations
page, click on the
Move
tab
at the top of the page.
The
Move
page displays (see figure 55 ):
Note: The
Physical/Logical Map
information is displayed at the
bottom of each
Operations
page.
Note: The physical map may show gaps in the element numbering
depending on the load port configuration.
Note: Under the
Logical Map
view, an option to print the view to a
local printer is available by clicking on the
Print View
link
located in the upper left-hand corner of the
Logical Map
section.
Note: The library must be off-line to move a cartridge.