Chapter 2: Installing the Chassis
Populate QXS 48-Drive Drawers
QX and QXS Setup Guide
58
l
Each drive is mated to a connector on the drawer PCBA.
l
In the absence of quantity-four drives, the chassis uses an AMS insert within drive bays to manage air
flow within the chassis, to help maintain optimal operating temperature.
Figure 64:
Aligning/Installing an AMS or Drive into Drawer
1
2
1.
AMS
2.
Disk
Each drawer has four drive bays. Each drive bay must be populated with either four (4 each) AMS inserts or
a full complement of four drives.
Installing an AMS Into a drawer
Refer to Figure 65 on the next page when orienting the AMS for insertion into the target drawer.
l
If you are installing into the left drawer or middle drawer, refer to the illustration on the left when
performing this step-procedure.
