Quantum Quantum ValueLoader, Руководство пользователя

Страница: 54 / 90

ValueLoader Administration
Updating Firmware
40 ValueLoader LTO-1/LTO-2 Tape Autoloader User Manual
3 Press the
[Enter]
button. The LCD screen indicates whether you are
about to turn Autoload Mode on or off.
4 Press the
[Enter]
button to accept the change to Autoload Mode or
press
[Cancel]
to exit and not save the changes.
Updating Firmware
3
Using SCSI 3 Quantum has the files and instructions necessary to update both the drive
and ValueLoader firmware via SCSI. Refer to
www.Quantum.com
for
details.
Caution: Regardless of the firmware update technique,
do not
power cycle or reset the ValueLoader during the upgrade
process
. Doing so could cause the ValueLoader to become
inoperable.
Note: After a firmware update, the firmware revision displayed
on the LCD may not be updated until the ValueLoader is
power cycled.