Quantum Quantum Fireball SE, Быстрое руководство

Страница: 1 / 3

1 of 1
ATA
Jumper Settings
DS CS PK Rsvd
S tand Alone ON OFF X OFF
M aster with Slave Present ON OFF X OFF
S lave to Master OFF OFF X OFF
X = PK is a Parking position. The presence or absence of this jumper has no effect on the drive.
Labeling may indicate to place this jumper when configuring as a slave. This is to provide for
retention of the jumper in the event it is needed later.
Jumper Locations
The Fireball SE disk drive has only one location where user configurable jumpers are found. The
jumper block is incorporated into the IDE / ATA cable connector. Using the jumper pins you can
establish the drive Master/Slave configuration.
Fireball SE
Jumper Settings